New gutters in Wisconsin usually cost about $4 to $14 per linear foot installed for aluminum or vinyl. A typical home lands between roughly $900 and $3,200. Copper and large or complex homes cost more. Use the numbers below to check a quote before you sign.
Published ranges differ by source. Each one measures a different mix of materials, home sizes and years. This guide shows the ranges, explains why they differ, and gives you a way to work out your own number.
TL;DR
- Wisconsin estimates run about $5 to $18 per linear foot installed, according to one 2026 cost estimate. Most homes sit in the lower half of that range.
- A 1,500 to 2,000 square foot roof costs about $1,600 for standard aluminum, steel or vinyl gutters, per Forbes Home.
- Measure your linear feet first. Total cost is length times price per foot, plus downspouts, removal and extras.
- Seamless aluminum is the common choice. Six-inch gutters, copper, steep roofs and two-story walls raise the price.
- Ask for a written quote that lists footage, size, material, gauge, downspouts and removal.
Table of Contents
- What new gutters cost per linear foot
- What a typical Wisconsin home costs
- What changes the price
- Should you replace 20-year-old gutters?
- Why gutters matter to the house
- Wisconsin conditions to plan for
- How to compare gutter quotes
- Our perspective
- Get a gutter and exterior quote
- FAQ
- Sources
What new gutters cost per linear foot
Contractors price gutters by the linear foot. You pay for the length of gutter run, not the size of the house. Here is what published sources report.
| Source | Scope | Reported price |
|---|---|---|
| CostOnce (March 2026) | Wisconsin, installed | $5 to $18 per linear foot |
| Angi (2026) | Seamless aluminum | $4 to $9 per linear foot |
| Bob Vila (June 2023) | Vinyl | $3 to $6 per linear foot |
| Bob Vila (June 2023) | Aluminum and galvanized steel | $4 to $14 per linear foot |
| Bob Vila (June 2023) | Copper | $25 to $40 or more per linear foot |
The ranges are wide on purpose. Material, gutter size, roof height and the number of corners all move the price. Older figures, such as the 2023 ones above, are lower than current local quotes in many cases. Treat them as a floor and confirm with a written bid.
Our own guide to seamless gutters and a vetting checklist covers installed pricing and what to ask a contractor.
What a typical Wisconsin home costs
Most Wisconsin houses need between 150 and 200 linear feet of gutter. A ranch with a simple roofline is at the low end. A two-story home with a garage and a porch is at the high end.
Published totals for a typical house:
- CostOnce uses a 175-foot home and states a total of $893 to $3,213.
- Forbes Home says a 2,000 square foot home generally costs $1,200 to $2,500 for gutter installation, based on a 2022 table. Its broader installed range is $600 to $4,100, with an average of $2,350.
- Fixr reports national seamless installation at $1,400 to $3,000 on average, and gives $840 to $8,750 as the spread for a 2,000 square foot house.
The spread is large because a 2,000 square foot house is not a fixed amount of gutter. A single-story home with a simple hip roof needs less than a two-story home with dormers.
How to estimate your own total
- Measure the eave length of each roof edge that will get a gutter. Add them up.
- Add a few feet per corner for waste and fittings, or let the installer measure.
- Count the downspouts. A common rule is one downspout for every 30 to 40 feet of gutter, plus one at each low point.
- Multiply the footage by the price per foot for the material you want.
- Add removal of the old gutters, repairs to fascia and any extras.
Worked example, using the Angi aluminum range of $4 to $9 per foot on a 150-foot home: 150 x $4 = $600 and 150 x $9 = $1,350. That is the material-and-labor band for plain seamless aluminum in 2026. A local quote with downspouts and removal will often land above it.
What changes the price
Material
Material sets the base price per foot. ProMatcher's Wisconsin cost report lists installed aluminum at $5.18 per foot, vinyl at $4.08, galvanized steel at $6.48 and copper at $26.89. Use these as a relative guide. The order is what matters: vinyl is cheapest, aluminum is mid-range, steel costs a bit more, copper is in a different class.
- Vinyl. Lowest price. It can crack in extreme cold, so it is a weaker fit for Wisconsin winters with heavy snow and ice.
- Aluminum. The common choice. It will not rust and comes in many colors.
- Galvanized steel. Stronger, and costs more.
- Copper. A premium look and price. Only some homes need it.
Seamless or sectional
Seamless gutters are formed on site from a coil, cut to the exact length of each run. Bob Vila notes that they cost more because of that on-site work, while their continuous construction reduces leak points. It reports an installed seamless range of $800 to $5,000.
Fewer seams means fewer places to leak or to catch debris. For most Wisconsin homeowners, seamless aluminum is the standard to price.
Gutter size
Five-inch gutters fit most homes. Angi says six-inch gutters hold about 50% more water and add $3 to $5 per linear foot. On a 150-foot home that is $450 to $750 more. Six-inch gutters make sense for large roof planes, steep pitches, or places where a valley sends a lot of water to one spot.
Home height and roof shape
Two-story work needs taller ladders or lifts and takes longer. Many corners, dormers and bay sections also take more time and more fittings. Expect a higher price for these homes.
Downspouts and drainage
Downspouts are often priced separately or built into a per-foot figure. Ask which. Extensions and splash blocks may be extra. Underground drains cost more again.
Removal and disposal
Tearing off old gutters costs money. Bob Vila lists removal and disposal at $0.65 to $0.85 per linear foot. Check that your quote either includes it or lists it.
Fascia and soffit condition
Gutters hang from the fascia. If the board is soft, new gutters will not hold. Rotted or warped soffit and fascia wood and bubbled paint are signs of water intrusion, according to the U.S. Department of Energy. Fixing the wood adds cost. It also protects the new gutters. We cover this work in our soffit, fascia and gutter repair service in Dodge County.
Timing with a roof or siding job
Gutters come off during a re-roof or a siding project. Replacing them at the same time avoids paying for the same ladder work twice. See our roof replacement and siding pages for the full scope.
Should you replace 20-year-old gutters?
Age alone is not the test. Condition is. Replace gutters when you see:
- Seams that leak or pull apart.
- Sagging runs or pulled-away hangers.
- Rust, cracks or peeling paint.
- Water running over the edge in light rain.
- Stains or pooling water at the foundation.
Aluminum can last a long time. Angi cites a 20 to 30 year lifespan for seamless aluminum. A 20-year-old system at the end of that range is worth an inspection. If the problems are local, a repair may be enough. If they run along the whole house, replace.
Why gutters matter to the house
Gutters are cheap compared with what water does when they fail. The U.S. Department of Energy says roof runoff that is not drained away can saturate the soil and wick through the foundation, causing interior moisture, mold and rot. Properly channeled rainwater helps keep basements and crawlspaces dry.
Do new gutters add value? We know of no figure that shows a fixed dollar return. What they do is protect the foundation, siding, fascia and landscaping, and those are the things a buyer and an inspector look at.
Downspout placement
The same Department of Energy page says downspouts should end at least 5 feet from the foundation, or 10 feet for underground catchment systems. Our downspout placement guide adds that runs should stay under 40 feet and discharge 5 feet away.
Where the water goes after the downspout matters too. If it runs onto a walkway or patio, the base can wash out. This overview of paver walkway drainage, slope and outlets shows how grade and outlets carry water away from hard surfaces.
Wisconsin conditions to plan for
Winter changes how you choose gutters in this state.
- Ice dams. Ice in roof gutters can let water seep under shingles and leak into the house. Gutters do not cause ice dams alone. Poor attic insulation and ventilation drive them. Strong hangers and a clean run help gutters survive the load. Read our guide on how to stop ice dams.
- Ice and water shield. The roof edge under the gutter needs proper underlayment. Our page on ice and water shield under Wisconsin code explains the 30 inch and 12 inch coverage rules.
- Hail and wind. Storms dent aluminum and pull gutters loose. If a storm damaged your roof, the gutters may be part of the claim. See our storm damage roof repair page and the free hail damage inspection.
- Heavy snow. Hangers matter more than the gutter itself. Ask how many hangers per foot the installer uses.
How to compare gutter quotes
Get at least three written quotes. Make sure each lists the same things.
| Item | What to look for |
|---|---|
| Linear feet | A measured figure, not a guess |
| Material and gauge | For example, .032 or .027 aluminum |
| Size | Five-inch or six-inch |
| Downspouts | Count, size, and where they discharge |
| Hangers | Type and spacing |
| Removal | Included or listed with a price |
| Fascia repair | Included or priced if found |
| Warranty | Material and workmanship, in writing |
| Insurance | Proof of liability coverage |
Watch for a quote that is far below the others. It may use thinner metal, fewer hangers or no removal. A lower price per foot means little if the list of items is shorter.
The range in Google results is also a warning. Pages that quote $3 per foot and pages that quote $25 per foot describe different jobs. Always compare line by line.
Our perspective
Most gutter failures we see are installation problems, not material problems. Hangers set too far apart. Runs with too little pitch. Downspouts that dump water at the foundation. A good aluminum gutter put up badly will fail before a plain one put up well.
That is why we supervise installs ourselves and document the work. You should be able to see what was installed, where, and how. We bring the same approach to roofs, siding and windows, which is why gutters often fit best as part of a larger exterior project.
Our advice: price gutters together with your roof edge, fascia and drainage plan. If your gutters are fine and the fascia is not, fix the fascia. If the gutters are failing, replace them once and do it right. We will tell you which one it is.
Heather
Get a gutter and exterior quote
AM Exteriors LLC is an owner-operated exterior contractor serving Southeast Wisconsin, including Dodge, Washington, Fond du Lac and Ozaukee counties. We handle roofing, siding, windows, gutters and storm damage repair, and we help with insurance claims.
If your gutters need work along with the fascia or soffit, start with our soffit, fascia and gutter repair page. If you are also planning a roof, see our roofing services.
For a quote, contact us through AM Exteriors. Have your address and any photos of the problem ready.
FAQ
How much are new gutters in Wisconsin?
Most published Wisconsin estimates fall between about $5 and $18 per linear foot installed. A typical home with around 175 feet comes to roughly $893 to $3,213 in one 2026 estimate. Your total depends on footage, material and roof height.
How much do new gutters cost on a 2,000 square foot house?
Forbes Home says a 2,000 square foot home generally costs $1,200 to $2,500, based on its 2022 table. It gives about $1,600 for standard aluminum, steel or vinyl. Two-story homes and six-inch gutters cost more.
Do new gutters add value to a home?
No source we found gives a fixed dollar return. Gutters protect the foundation, basement and exterior from water, which the Department of Energy links to moisture, mold and rot. A home with working drainage is easier to sell.
Should I replace 20-year-old gutters?
Replace them if they leak at the seams, sag, rust or overflow in normal rain. If only one section is damaged, a repair may be enough. Have the fascia checked at the same time, since rotted wood means the gutters will not hold.
Sources
- Install Gutters Cost in Wisconsin 2026, CostOnce
- How Much Does Gutter Installation Cost? Forbes Home
- Cost to Install Seamless Gutters, Fixr
- Gutter Installation Cost, Bob Vila
- Wisconsin Gutters Costs and Prices, ProMatcher
- How Much Do Seamless Gutters Cost to Install? Angi
- Consumer Guide to Durable Attics, U.S. Department of Energy
- Stormwater Gutters Downspouts, Building Science Education
- Paver Walkway Drainage: Slope, Base and Outlet Basics